Dell 5324 Switch User Manual


 
Command Modes 51
MA (Management Access-level) Mode
PE (Privileged User EXEC) Mode
history size Changes the command history buffer size for a particular line.
password Specifies a password on a line.
autobaud
Sets the line for automatic baud rate detection
speed Sets the line baud rate.
Command Description
deny (management) Defines a deny rule.
permit (management) Defines a permit rule.
Command Description
show dot1x users Displays 802.1X statistics for the specified interface.
boot system Specifies the system image that the device loads at startup.
clear arp-cache Deletes all dynamic entries from the ARP cache.
clear bridge Removes any learned entries from the forwarding database.
clear gvrp statistics Clears all the GVRP statistics information.
clear host Deletes entries from the host name-to-address cache
clear host dhcp Deletes entries from the host name-to-address mapping received from
Dynamic Host Configuration Protocol (DHCP).
clear logging Clears messages from the internal logging buffer.
clear logging file Clears messages from the logging file
clear spanning-tree detected-
protocols
Restarts the protocol migration process on all interfaces or on the
specified interface.
clock set Manually sets the system clock.
configure Enters the global configuration mode.
copy Copies files from a source to a destination.
crypto certificate request Generates and displays certificate requests for HTTPS.
dot1x re-authenticate Manually initiates a re-authentication of all 802.1X-enabled ports or the
specified 802.1X-enabled port.
login Returns to User EXEC mode.
reload Reloads the operating system.