Filter
Top Products
Installing System Components 111
• Install memory modules in bank 1 (DIMM1_
x
) before installing memory
modules in bank 2 (DIMM2_
x
), and install memory modules in bank 2
before installing memory modules in bank 3 (DIMM3_
x
).
• Configurations of three or five memory modules are not supported.
Removing Memory Modules
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any components inside the system. Before performing any
procedure, see your Product Information Guide for complete information about
safety precautions, working inside the computer, and protecting against
electrostatic discharge.
1
Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet and from the peripherals.
2
Remove the system cover (see "Removing the System Cover" on page 66).
3
Remove the processor airflow shroud (see "Removing the Processor Airflow
Shroud" on page 70).
Table 3-1. Sample Memory Module Configurations
Total
Memory DIMM1_A DIMM1_B DIMM2_A DIMM2_B DIMM3_A DIMM3_B
512 MB 512 MB
1 GB 512 MB 512 MB
1 GB 1 GB
2 GB 512 MB 512 MB 512 MB 512 MB
2 GB 1 GB 1 GB
3 GB 512 MB 512 MB 512 MB 512 MB 512 MB 512 MB
4 GB 1 GB 1 GB 1 GB 1 GB
4 GB 2 GB 2 GB
6 GB 1 GB 1 GB 1 GB 1 GB 1 GB 1 GB
8 GB 2 GB 2 GB 2 GB 2 GB
12 GB 2 GB 2 GB 2 GB 2 GB 2 GB 2 GB
24 GB 4 GB 4 GB 4 GB 4 GB 4 GB 4 GB