Filter
Top Products
Installing System Components 81
3
Disconnect the data cable and the power cable from the hard drive in the
drive bay.
4
Press in on the blue tabs on each side of the hard drive bracket and slide
the drive up and out of the bay.
Figure 3-13. Removing and Installing a Cabled Hard Drive
NOTE: If you are not replacing the hard drive, remove the drive from the drive
bracket (see Figure 3-14) and insert the empty bracket back into the drive bay.
5
Replace the system cover (see "Installing the System Cover" on page 67).
1 hard drive 2 data cable
3 power cable 4 blue tabs (2)
3
4
2
1