Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
Using the Console Interface
89
Figure 6-21. Static Filtering Table screen
To make a change to the Custom Filtering Table, choose
Add or Remove in the Action field. Then enter the MAC
Address and press APPLY.
Configure Static Multicast Filtering
Multicast filtering allows you to block or forward traffic
over each port for one multicast group.
To access the Custom Multicast Filtering Table, select
Configure Filtering and Forwarding Table from the
Configuration menu. Then select Configure Permanent
Multicast Filtering from the bottom of the Configure
Filtering and Forwarding table screen. The following
screen appears: