Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
126 Using the Console Interface
Restart System
To perform a system reset, choose Restart System from the
main menu. Please note there is no confirmation query
before the system is rebooted.
Figure 6-49. Restart System screen
Factory Reset
Before performing a factory reset, be absolutely certain
that this is what you want to do. Once the factory reset is
done, all of the Switch’s settings stored in NV-RAM
(including TCP/IP parameters, SNMP parameters, the
enabled/disabled settings of ports, security settings, etc.)
will be erased and restored to values present when the
switch was purchased.
After performing the Factory reset, make sure to redefine
the IP settings for the switch in the Configure IP Address
menu. Then perform a Reset System on the switch. After