Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
Using the Console Interface
125
Figure 6-48. Switch History screen
The switch history entries are listed sequentially from the
last time the Switch was rebooted. Use the following keys
to move around the screen above: N – Page down, P – Page
up, B – Begin, E – End, and C – Clear Log. CTRL+R will
refresh the screen.
Resetting the Switch
You can use the console interface to reset the Switch,
either performing a Restart System (which restarts the
Switch and is identical to powering the Switch off and on
again), or a Factory Reset (which sets all of the Switch’s
parameters to what they were when the Switch was
purchased).