Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
Using the Console Interface
65
♦ Default Gateway IP address that determines where
frames with a destination outside the current subnet
should be sent. This is usually the address of a router
or a host acting as an IP gateway. If your network is
not part of an internetwork, or you do not want the
Switch to be accessible outside your local network,
you can leave this field unchanged.
Configure Console
You can use the Console Options screen to choose whether
to use the Switch’s RS-232C serial port for console
management or for out-of-band TCP/IP communications
using SLIP, and to set the bit rate used for SLIP
communications.
Choose Configure Console to access the last item on the
Configuration menu. The following screen appears:
Figure 6-9. Console Options screen
The following fields can be set: