Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
150 Web-Based Network Management
STP Parameter & Port Settings
To configure Spanning Tree Protocol functions for the
Switch or individual ports, enter the desired information
in the fields on this screen (see the descriptions below for
assistance) and then click Apply.
The information on the screen is described as follows:
♦ Spanning Tree Protocol (STP) for all ports is This
option offers Disabled or Enabled to implement the
Spanning Tree Protocol.
♦ Bridge Priority: (0 .. 65535)/Priority A Bridge
Priority can be from 0 to 65535. Zero is equal to the
highest Bridge Priority.
♦ Hello Time: (1 . . 10 sec) The Hello Time can be from
1 to 10 seconds. This is the interval between two
transmissions of BPDU packets sent by the Root