Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
122 Using the Console Interface
Figure 6-46. Browse Address Tabl
To browse by MAC address, select MAC address in the
Search by field, enter the desired MAC address in the next
field, and then press FIND.
To browse by port number, select Port in the Search by
field, enter the desired port in the next field, and then
press FIND.
The lower part of the screen is a read-only Browse Address
Table that contains Port, MAC Address and Learned status
of each entry. Use N to advance to the next page and P to
return to the previous page.
Browse IGMP Status
The Browse IGMP Status function allows you to browse
Internet Group Management Protocol (IGMP). The Switch
is able to recognize IGMP queries and reports sent
between stations and an IGMP router. When enabled for
IGMP snooping, the switch can open or close a port to