D-Link DES-3225G Switch User Manual


 
24-port NWay Ethernet Switch User’s Guide
Using the Console Interface
77
Speed/Duplex This field is read-only since the
Gigabit Ethernet module must always be set to
1000Mbps, full-duplex.
Flow Control Enables or disables IEEE 802.1x full-
duplex (only) flow control on this port. See Flow
Control in the Configure Ports section above for a
more detailed explanation.
Priority selects Normal, High or Low. See Priority in
the Configure Ports section above for a more detailed
explanation.
Port Lock When locked, automatic learning for all
stations connected to this port will stop and entries
in the Forwarding Table for all devices residing on
this port will age out. The only traffic this port will
allow is traffic from machines whose MAC address is
manually entered in the Static Forwarding Table.
Broadcast Storm Rising Action selects an action –
Do Nothing, Block, Block and Trap – for the port
when the Broadcast Storm Rising Threshold (below)
condition is met. See Broadcast Storm Rising Action
in the Configure Ports section of this manual for a
more detailed explanation.
Broadcast Storm Rising Threshold This setting
defines a ceiling for the number of broadcast packets
per second on this port. See Broadcast Storm Rising
Threshold in the Configure Ports section of this
manual for a more detailed explanation.
Broadcast Storm Falling Action This setting will be
activated when the Broadcast Storm Rising
Threshold and then the Broadcast Storm Falling
Threshold (below) is met. This setting can be