Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
106 Using the Console Interface
Figure 6-34. Update Firmware and Configuration Files screen
After making your changes in the fields above, press
RESET SWITCH TO START UPDATE to initiate the update
sequence.
The fields you can set are:
♦ TFTP Server Address The IP address of the TFTP
server where the runtime (switching software) or
configuration file is located. This entry is used only if
the Firmware Update is set to Enabled.
♦ Firmware Update Determines whether or not the
Switch will try to look for a runtime image file on the
TFTP server.
♦ File Name The complete path and filename of the
runtime image file on your TFTP server to be
uploaded to the switch.
♦ Use Configuration File Toggle to Enabled to use the
settings in a configuration text file when the switch