Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
Web-Based Network Management 131
IP Settings
You can change the IP Address, Subnet Mask, and Default
Gateway on the Switch. If you are not using BootP, enter
the IP Address, Subnet Mask, and Default Gateway of the
Switch. If you enable BOOTP, you do not need to configure
any IP parameters because a BOOTP server automatically
assigns IP configuration parameters to the switch. Click
Apply to activate the new settings.
The information is described as follows:
♦ BOOTP The BootP protocol allows IP addresses,
subnet masks, and default gateways to be assigned
on a central BootP server. If this option is enabled,
when the Switch is first powered up it will look for
a BootP server to provide it with this information
before using the supplied settings.