Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
112 Using the Console Interface
Figure 6-39. SNMP Manager Configuration screen
The following SNMP Manager and Trap Manager
Configuration parameters can be set:
♦ SNMP Community String The community string that
will be included on SNMP packets sent to and from
the switch. Any station not privy to this community
will not receive the packet.
♦ Access Right Allows each community to be
separately set to either Read Only, meaning that the
community member can only view switch settings or
Read/Write, which allows the member to change
settings in the switch.
♦ Status Determines whether this community name
entry is Valid or Invalid. An entry can be disabled by
changing its status to Invalid.
♦ IP Address The IP address of the network
management station to receive traps.