Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
10 Unpacking and Setup
Figure 2-2B. Installing the switch on an equipment rack
Power on
The DES-3225G switch can be used with AC power supply
100-240 VAC, 50 - 60 Hz. The power switch is located at the
rear of the unit adjacent to the AC power connector and
the system fan. The switch ’s power supply will adjust to
the local power source automatically and may be turned
on without having any or all LAN segment cables
connected.
After the power switch is turned on, the LED indicators
should respond as follows:
♦
All LED indicators will momentarily blink. This
blinking of the LED indicators represents a reset of
the system.