Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
Sample Configuration File 191
Code_types are PROM, RUNTIME, or CONFIG. This should
always be the first setting.
• PROM – PROM update file.
• RUNTIME – Switching software update file.
• CONFIG – Image file of switch settings
created by the settings backup procedure.
♦
Image_file – this command tells the switch the
complete path and filename for the file to be loaded
into the switch. For example,
“
e:\3225\3225prom.tfp ”. Make sure double-quotes
are used as in the example file below.
♦
Ip_addr – this is the IP address that will be assigned
to the switch. This command is included for
downloading a configuration settings file to another
switch. The IP address defined in this file will override
the IP address in the configuration settings file, thus
the switch you are downloading to can have a different
IP address than the one that created the configuration
settings file. An example IP address is
10.12.19.102.
♦
Subnet_mask – this is the subnet mask that will b e
assigned to the switch. An example subnet mask is
255.128.0.0.
♦
Default_gateway – this is the default gateway IP that
will be assigned to the switch. An example default
Gateway IP is
10.254.254.253.
♦ # – Remark. When placed as the first character on a
line, the entire line will be ignored by the switch. This
allows items to be labeled, or unused commands to