Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
108 Using the Console Interface
Figure 6-36. Ping Test screen
After filling in the fields above, press START to initiate the
Ping test.
The fields you can set are:
♦ Destination IP Address The IP address of the device to
be Pinged.
♦ Repetitions Amount of times the Switch should send the
Ping (1-255). If zero is chosen, the Switch will continue
Pinging indefinitely.
In the lower part of the Ping Test screen, you can view the
Ping status, including Result, Reply, Time out, and
Unreachable.