Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
192 Sample Configuration File
remain in the file so that the syntax will not be
forgotten.
Notes about the Configuration File:
This configuration file can only contain 4 settings:
Code_type, Ip_addr, Subnet_mask and
Default_gateway.
Each command can only appear once in the configuration
file.
If both the Firmware Update and Use Configuration file
options are enabled, the Firmware Update command will
take precedence and only the firmware file will be
uploaded to the switch.
The Config image file, which contains all configuration
settings and was created by the switch is prefixed with the
version number of the runtime software to help with file
management.
# Sample Config File
Code_type=PROM
Image_file="e:\3225\3225prom.tfp"
# specify IP address
Ip_addr = 10.12.19.102
# specify subnet mask
Subnet_mask = 255.128.0.0
# specify default gateway
Default_gateway = 10.254.254.253