Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
76 Using the Console Interface
STP Port State and Status reflect the current conditions of
the port. They are read-only fields and cannot be changed.
Configure Slot2 Module
This screen allows you to change the port state of the
optional 1000BASE-SX module in slot 2. This is useful in
the case when you would like to partition a port due to
excessive collision, or for observation, device repair, or
security reasons. Great caution, however, must be
observed when disabling a port , since all data passing
through the port will be discarded by the switch.
The Configure Slot2 Module screen appears as follows:
Figure 6-14. Slot2-Port Configuration screen
♦ Port field specifies either Slot1-TP1, the Port 1x port
or Slot1-TP2, the Port 2x port on the module. For
single-port modules, only Slot1-TP1 will be available.
♦ State Enables or Disables this port.