Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
Using the Console Interface
63
Figure 6-7. Configuration menu
You will need to change some settings to allow you to be
able to manage the Switch from an SNMP-based Network
Management System such as SNMP v1 or to be able to
access the Switch using the TELNET protocol. See the next
chapter for Web-based network management information.
Configure IP Address
The Switch needs to have an IP address assigned to it so
that an In-Band network management system or TELNET
client can find it on the network. The IP Configuration
screen allows you to change the settings for the two
different interfaces used on the Switch: the Ethernet
interface used for in-band communication, and the SLIP
interface used over the console port for out-of-band
communication.
Choose Configure IP Address to access the first item on the
Configuration menu. The following screen appears: