Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
Using the Console Interface
103
Figure 6-32. 802.1Q Static VLAN Settings screen
The fields you can set are:
♦ VID Enter a VLAN ID from 2 to 2048. This is the VLAN
that will be defined on this screen.
♦ VLAN Name Description of the VLAN.
♦ Tag/Untag Toggle between “T” for tag and “U” for untag
for each port.
♦ Egress Position the cursor over the dash “-
“ representing the appropriate port number and press
<space bar> to select “E” for Egress, or leave the dash “-“.
An E designates the specified port as a static member of
the VLAN. A dash means the port is not given VLAN
membership for the VID entered above.
♦ State Toggle between Active and Inactive.
A table on the lower part of the screen displays the settings
for each VLAN. The table displays the VLAN number (VID),