Filter
Top Products
24-port NWay Ethernet Switch User’s Guide
74 Using the Console Interface
Figure 6-13. Slot1-Port Configuration screen
♦ Port field specifies either Slot1-TP1, the Port 1x port
or Slot1-TP2, the Port 2x port on the module. For
single-port modules, only Slot1-TP1 will be available.
♦ State Enables or Disables this port.
♦ Speed/Duplex Selects the desired Speed and Duplex
fort the port. Possible settings include: Auto,
100M/Full, 100M/Half, 10M/Full, or 10M/Half.
Choosing Auto enables NWay auto-configuration on
the port.
♦ Flow Control Enables or disables IEEE 802.1x full-
duplex (only) flow control on this port. See Flow
Control in the Configure Ports section above for a
more detailed explanation.
♦ Priority selects Normal, High or Low. See Priority in
the Configure Ports section above for a more detailed
explanation.