Filter
Top Products
168
FM-3 Programming Module Reference Manual
Line Voltage (EN ONLY)
LineVoltage
This parameter is used to calculate critical internal gains. There are two possible value: 115
or 230 VAC. A value of 115 VAC should not be used if the actual line voltage is 230,
otherwise damage to the EN drive may result. The default value is 230 VAC.
BaudRate
Modbus.BaudRate
Modbus baudrate for this FM module and drive.
Modbus Id
Modbus.ModbusId
Modbus ID # for this FM module and drive.
Debounced
ModuleInput.#.Debounced
This is the state of the input after the debounce is taken into account.
Module Input Debounce Time
ModuleInput.#.DebounceTime
The Module Input Debounce Time parameter is the minimum time a digital input must be on
in order to be recognized by the FM-3. This feature helps prevent false triggering in
applications in electrically noisy environments.
Module Input Force
ModuleInput.#.Force
Input can be forced either On or Off. This bit is the state to which the input will be forced
when the ForceEnable bit is activated.
Module Input Enable Force
ModuleInput.#.ForceEnable
If ModuleInput.#.ForceEnable is True (or On), then the state of the ModuleInput.#.Force bit
will override the current input state.