Filter
Top Products
26
FM-3 Programming Module Reference Manual
Figure 27: Update to RAM Flow Chart
The Update to RAM button operates according to the following rules:
If no parameters have been modified by the user, the Update to RAM button will be disabled.
If the user modifies a parameter that does not require a full download, the Update to RAM
icon will be enabled.
If while the icon is enabled, the user modifies a parameter that requires a full download, the
Update to RAM icon will become disabled.
When the user clicks on the Update to RAM icon, all the modified parameters are transmitted
to the FM-3. Once transmitted, the icon will become disabled again until another parameter
is changed.
If the user performs a full download while the button is enabled, when the download is
complete, the Update to RAM button will be disabled.
If the user modifies parameters, and disconnects, the update button will be disabled, and the
changes will not be sent.
Options/Preferences/Ptools Operation
This menu controls the pop-ups that the user encounters when uploading and downloading
the FM-3/4 configuration.
Download Section:
“Ignore saving file on Ptools/Drive revision conversion.”
On a download PowerTools Pro checks the firmware revision of the module that it is about
to be downloaded to and is required to make changes to the files that are to be downloaded to
older firmware revisions. This checkbox allows the user to avoid saving the newer file before
converting it to a previous revision.
“Overwrite – Reset the NVM configuration”