Filter
Top Products
Maintenance and Transportation
5-5
Removing and Installing an Ink Cartridge
You should replace an ink cartridge only when its Ink Out B
light is flashing or on.
1. Make sure the printer is turned on and not printing.
2. Open the ink cartridge compartment by pushing the top of
the ink compartment door. You see four slots for the ink
cartridges.
3. Carefully pull the used ink cartridge straight out of the
printer.
4. Make sure the replacement ink cartridge is the correct
color; then remove it from its packaging.
5. Insert the ink cartridge into the slot with the foil plug end
first and the arrow pointing toward the printer. Push the
cartridge all the way into its slot until it meets resistance.
The
Ink Out light turns off. If it remains on, pull the ink
cartridge partly out of its slot and reinsert it.
6. Close the ink compartment door.
Caution:
Leave the empty cartridge
installed in the printer until
you are ready to replace it.
Once you remove an ink
cartridge, it becomes
unusable and cannot be
reinstalled.
Warning:
If ink gets on your hands,
wash them thoroughly with
soap and water. If ink gets
into your eyes, flush them
immediately with water.
Loire-PLUS.BK.book Page 5 Friday, May 2, 2003 2:56 PM