Filter
Top Products
Printing on Special Media
3-33
6. Press the
Load/Eject button to eject the paper backward.
7. Using your hands, roll back the paper all the way out of the
manual feed slot and onto the roll. When it’s completely
out, the
Pause and Paper Out S lights turn on.
8. Press the
Pause button to turn off the lights.
9. If you won’t be using your roll paper for awhile, store it in
its original packaging. See Appendix C for optimum
storage conditions.
10. Before printing on another type of paper, be sure to change
the
Paper Source, Paper Size, and Media Type settings
in your printer software as described in Chapters 1 and 2.
Also be sure to turn off banner mode using the
default-setting mode instructions on page B-8.
If you’ll be printing on continuous paper, also be sure to
reset the paper-release lever, as described on page 3-16.
Note:
You don’t need to
remove the banner paper
cutter when printing on
other media. Simply slide
it all the way to the left
when you’re finished
cutting with it.
If you need to remove
the banner paper cutter,
see its documentation
for removal instructions.
Loire-PLUS.BK.book Page 33 Friday, May 2, 2003 2:56 PM