Filter
Top Products
Printing on Special Media
3-18
10. Arrange the continuous paper stack so the printable side is
face up. Fit the first four holes over the sprocket pins on
both sprockets; then close the sprocket covers.
11. Slide the right sprocket to remove any slack in the paper.
Then press down the sprocket-lock lever to lock it in place.
If necessary, align your stack of continuous paper so it will
feed straight into the tractor feeder.
12. Reinstall the manual feeder on the top of the printer.
13. Make sure the edge of the paper tray is beneath the paper
tray cover so the continuous paper does not catch on it as it
ejects.
Note:
If you run out of
continuous paper while
printing, the Paper Out
S
and Pause lights come
on. Load more paper on
the tractor feeder and
press the Pause button
to continue printing.
Loire-PLUS.BK.book Page 18 Friday, May 2, 2003 2:56 PM