Filter
Top Products
Managing Print Jobs and Network Printing
4-9
Network Printing on a PC
You can use your printer on a network under Windows or
another network operating system. First you need to set up your
printer using either the network’s printer port setup functions
or your printer software’s built-in network support.
If you’re setting up your printer for Windows XP or 2000, see
the instructions on page 4-9. For Windows NT, see page 4-11.
For other network operating systems, see your network
documentation for instructions or use the printer software’s
network support, as described on page 4-12.
Setting Up a Network Port on Windows XP
or 2000
The process of setting up a network port is similar on Windows
XP and Windows 2000. Although this section shows Windows
XP, you’ll see similar screens in Windows 2000. For either
system, make sure you are logged in to the computer as an
administrator.
1. Do one of the following:
◗ In Windows XP, click
Start > Control Panel >
Printers and Other Hardware > Printers and
Faxes.
◗ In Windows 2000, click Start > Settings > Printers.
2. Right-click the EPSON Stylus COLOR 3000 printer icon,
then click
Properties.
3. On the Ports tab, click Add Port.
Note:
If you need to install a
network interface card
in your printer, see the
Quick Setup guide for
instructions.
Loire-PLUS.BK.book Page 9 Friday, May 2, 2003 2:56 PM