Filter
Top Products
Managing Print Jobs and Network Printing
4-15
Network Printing on a Macintosh
If you want to use your printer on an AppleTalk
®
network, you
need to install the optional Ethernet
™
card as described in the
Quick Setup guide.
Then you can use the
EPSON Namer utility and set up your
printer in the Chooser. The
EPSON Namer was installed on
your hard drive along with the other printer software.
Assigning a Name to the Printer
Follow these steps to use the EPSON Namer utility:
1. Double-click the
EPSON Namer icon on your hard drive.
2. Click the
SC3000(AT) icon in the Device Types window.
3. Select the AppleTalk zone where your printer is located.
4. Under
New Name, type a name from your printer to
distinguish it from other printers on the network.
5. Click
Rename and then click Done.
Loire-PLUS.BK.book Page 15 Friday, May 2, 2003 2:56 PM