Epson 10600 Printer User Manual


 
1-23
Setting Up the Printer | 1-23
Connecting to the Parallel Port (Windows Only)
To use the printers built-in parallel interface, you need a shielded,
bidirectional, parallel cable. Follow the steps below to connect the printer to
your computer:
1. Make sure both the printer and your computer are turned off.
2. Plug the cable connector securely into the printers interface. Then
squeeze the wire clips together until they lock into place on both sides.
3. Plug the other end of the cable into the computers parallel port.
When done, continue with the instructions on page 1-26.