Filter
Top Products
1-31
Setting Up the Printer | 1-31
8. If you see a screen like this during installation, do not click
Retry
or
Cancel
. Click the close button.
9. When you see a message informing you that installation is complete,
click
OK
or
Finish
. If asked to do so, restart your computer.
10. If you see a message that the port setting has defaulted to LPT1, you
may need to reset the port if you’re not using a parallel connection (for
example, if you’re using Ethernet or FireWire). See your online Reference
Guide for instructions.
11. If any screens remain open, close them to exit.
12. Now you can install the on-screen Reference Guide. (If you don’t want to
install it, remove the CD-ROM.)
•
Make sure the CD-ROM is in your computer. If you don’t see the
main menu screen, double-click
My Computer
(or
Start > My
Computer
in Windows XP). Then double-click your CD-ROM
icon.
•
At the main menu screen, select
Reference Guide
.
•
Select
Install Reference Guide
and follow the on-screen
instructions to finish installing it.
•
When done, close any open windows and remove the CD-ROM.
If you’re connecting the printer directly to your computer (not over a
network), continue with the instructions on page 1-33.
Note
The on-screen Reference
Guide provides additional
information about the
printer, drivers, and utility
software.