Filter
Top Products
6. WEB FUNCTIONS
6-8
How to set internal call routing
When a voice call (only 4kbps AMBE+2) is received, the call can be transferred to an
internal phone automatically. Follow the procedures to set up the internal call routing.
1. From the menu bar, click [Settings] - [PBX settings] - [Internal call routing].
2. To enable the internal call routing function, put a checkmark in the Enable/Disable
box. With no checkmark this function is deactivated, and a call is routed according
to "How to set incoming route" on page 6-2.
3. Select a guidance language; English or Japanese.
4. Set a timeout time between 10 seconds to 99 seconds. If nobody answers the
transferred call during the timeout time, this call is transferred again to phones
specified for incoming routing
5. Click the [Apply] button to activate the internal call routing.
When a voice call is received, the FELCOM 250/500 plays guidance to the calling par-
ty. Then, the calling party inputs an extension number. The call is then transferred to
that number.
X Operation at calling side in the automatic transfer function
1) Call this vessel (AMBE+2). You are requested to dial extension number.
2) Dial extension number (4 digits). The extension number is called.
3) When the party answers, pick up the receiver.
4) Hang up the receiver after completing the call.