Filter
Top Products
Replacing and Adding Internal Devices 35
4
Unclip the heatsink by pressing down on the top of the clip, then pushing
the top of the clip toward the heatsink.
5 Lift the heatsink off of the processor.
6 Remove the processor by pulling the lever arm slightly away from the
processor socket, then lifting it to a ninety-degree angle.
7 Lift the old processor out of the socket.
8 Insert the new processor by aligning pin one on the processor and the
socket, then place the processor into the socket.
Clip
Hook
1
2
2
1
Pin 1
8507328.book Page 35 Thursday, February 15, 2001 11:28 AM