Filter
Top Products
Using the BIOS Setup Utility 61
5
Using the BIOS
Setup Utility
About the BIOS Setup utility
The server BIOS has a built-in setup utility that lets you configure several basic
system characteristics. The settings are stored in battery-backed RAM and are
retained even when the power is off.
Enter the BIOS Setup utility by restarting the server, then pressing F2 when
prompted during the startup process. The Main BIOS Setup utility screen
opens. It may not look exactly like the screen shown below.
BIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
BIOS Version
System Time:
System Date:
Legacy Diskette A:
>Primary Master:
>Primary Slave:
>Secondary Master:
>Secondary Slave:
System Memory:
3A00
[xx:xx:xx]
[xx/xx/xxxx]
[ ]
[CD-ROM]
[None]
[None]
[None]
256 MB
[TAB], [Shift-Tab], or
[Enter] selects field.
F1 Help
↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit ←→ Select Menu ENTER Select > Sub-Menu F10 Save & Exit
8507328.book Page 61 Thursday, February 15, 2001 11:28 AM