Filter
Top Products
x Maintaining and Troubleshooting the Gateway ALR 9200 Server
Important Safety Instructions
Observe the following guidelines when performing any work on your
system:
• Follow all instructions marked on the server and in the
documentation.
• Unplug this product from the wall outlet before cleaning. Do not
use liquid or aerosol cleaners. Use a damp cloth for cleaning.
• Do not use this product near water. Do not spill liquid on or into the
server.
• Do not place the server on an unstable surface.
• Openings in the system cabinet are provided for ventilation. Do not
block or cover these openings. Do not place the server near or upon
a radiator or heat register.
• Use only the power source shown on the power supply. If you are
not certain about the power source, ask the local power company.
• The server is equipped with a 3-wire grounding plug (a plug with a
grounding pin). This plug only fits into a grounded power outlet.
This is a safety feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace the outlet.
• Do not walk on the power cord or allow anything to rest on it.
• If you use an extension cord with this system, make sure the total
ampere ratings on the products plugged into the extension cord do
not exceed the extension cord ampere rating. Also, the total ampere
requirements for all products plugged into the wall outlet must not
exceed 15 amperes.
• Never insert objects of any kind into the system ventilation slots.
• Unplug the system from the wall outlet and refer servicing to
qualified personnel if:
• The power cord or plug is damaged.
• Liquid has been spilled into the system.
• The system does not operate properly when the operating
instructions are followed.
• The system was dropped or the cabinet is damaged.
• The system’s performance changes.
Warning!
Do not attempt to service
the system yourself except
as explained elsewhere in
the manual. Adjust only
those controls covered in
the instructions.
Opening or removing covers
marked “Do Not Remove”
may expose you to
dangerous voltages or other
risks.
Refer all servicing of those
compartments to qualified
service personnel.
Important!
The system power cord
serves as the main
disconnect for the
computer. The wall outlet
must be easily accessible by
the operator.
3424.boo Page x Wednesday, September 2, 1998 9:23 AM