Filter
Top Products
110
Enhancements in Release F.04.08
Configuring RADIUS Authentication and Accounting
For example, suppose you have configured the switch as shown in figure 43 and you now need to
make the following changes:
1. Change the encryption key for the server at 10.33.18.127 to "source0127".
2. Add a RADIUS server with an IP address of 10.33.18.119 and a server-specific encryption key of
"source0119".
Figure 43. Sample Configuration for RADIUS Server Before Changing the Key and Adding Another Server
To make the changes listed prior to figure 43, you would do the following:
Figure 44. Sample Configuration for RADIUS Server After Changing the Key and Adding Another Server
To change the order in which the switch accesses RADIUS servers, refer to “Changing RADIUS-Server
Access Order” on page 126.
Changes the key for
the existing server to
"source0127" (step 1,
above).
Adds the new
RADIUS server with
its required
"source0119" key.
Lists the switch’s
new RADIUS server
configuration.
Compare this with
figure 43.