Filter
Top Products
192
Enhancements in Release F.02.02
New Time Synchronization Protocol Options
Figure 88. The System Information Screen (Default Values)
2. Press
[E] (for Edit). The cursor moves to the System Name field.
3. Use [v] to move the cursor to the
Time Sync Method field.
4. Use the Space bar to select
SNTP, then press [v] once to display and move to the SNTP Mode field.
5. Do one of the following:
• Use the Space bar to select the
Broadcast mode, then press [v] to move the cursor to the
Poll Interval field, and go to step 6. (For Broadcast mode details, see "SNTP Operating
Modes" on page 189.)
• Use the Space bar to select the
Unicast mode, then do the following:
i. Press [>] to move the cursor to the
Server Address field.
ii. Enter the IP address of the SNTP server you want the switch to use for time synchro-
nization.
Time Protocol Selection Parameter
– TIMEP
–SNTP
– None