HP (Hewlett-Packard) 2300 Switch User Manual


 
153
Enhancements in Release F.02.11
Fast-Uplink Spanning Tree Protocol (STP)
3. If the Protocol Version is set to RSTP (as shown in figure 70), do the following:
a. Press
[E] (Edit) to move the cursor to the Protocol Version field.
b. Press the Space bar once to change the Protocol Version field to STP.
c. Press
[Enter] to return to the command line.
d. Press
[S] (for Save) to save the change and exit from the Spanning Tree Operation screen.
you will then see a screen with the following:
Figure 71. Changing from RSTP to STP Requires a System Reboot
e. Press
[0] (zero) to return to the Main Menu, then [6] to reboot the switch.
f. After you reboot the switch, enter the menu command at the CLI to return to the Main Menu,
then select:
2. Switch Configuration . . .
4. Spanning Tree Operation
You will then see the Spanning-Tree screen with STP (802.1D) selected in the Protocol Version
field (figure 72).
The asterisk indicates that
you must reboot the
switch to implement the
configuration change
from RSTP to STP.