Filter
Top Products
249
Software Fixes
■ Syslog (PR_1000003656) — The syslog capability added to F.05.22.
■ Syslog (PR_1000004080) — A timep event log message on syslog is truncated.
■ Web (PR_81848) — 'Clear changes' button does not work for the Default Gateway or VLAN
selections.
■ Web (PR_82039) — If the user selects GVRP mode, selects a port and then selects nothing
as an option for the port mode, all ports below the selected port disappear. This does not
affect the switch configuration.
■ Web (PR_82199) — VLAN port modification shows misleading mode. In the Configuration
- VLANs - Modify page, select a port, then set the "mode" modify pull-down menu to "tagged".
Select another port. The "mode" pulldown field remains set to "tagged", which is misleading
and incorrect, in general.
■ Web (PR_92078) — After making changes under the Device Features tab the page never
fully loads.
■ Web/IP Stack Management (PR_92826) — When using the Web browser interface with
a large stack of Switches, if the user moves very quickly from one option to another the Web
interface may freeze or the commander may crash with a Bus Error.
■ Web (PR_97407) — During port security configuration the switch may report "Unable to
add new MAC Address. MAC entry is either a multicast, broadcast or NULL address",
regardless of the actual cause of the failure. The fix is to display a meaningful error message.
■ Web (PR_97671) — When trying to add more than the maximum allowed number of VLANs
the switch responds with the vague message "Commit failed".
■ Web (PR_98500) — With Sun java 1.3.1 the browser window may spontaneously close.
■ Web (PR_1000000452) — Resetting the Switch leads to the URL aol.co.uk.
■ Web (PR_1000001702) — Sometimes when the user clicks on the Apply button on the
Configuration/Monitor Port screen the Switch complains, "not enough params specified".
Release F.05.23 (Not a General Release)
Fixed in release F.05.23
■ GVRP (PR_1000005082) — Incorrect error message 'Commit Failed' when trying to add
more than the configured "max vlans" using CLI.
■ SNMP (PR_1000004345) — The data for MIB object 'dot1dStpPortDesignatedPort' is
presented in byte-reversed order.
■ Telnet (PR_92019) — After establishing the maximum number of telnet sessions, a session
that is closed will still be shown as active.