Filter
Top Products
124
Enhancements in Release F.04.08
Configuring RADIUS Authentication and Accounting
RADIUS Authentication
Syntax: show authentication Displays the primary and secondary authentication
methods configured for the Console, Telnet, Port-Access
(802.1X), and SSH methods of accessing the switch. Also
displays the number of access attempts currently allowed
in a session.
show radius authentication Displays NAS identifier and data on the configured RADIUS
server and the switch’s interactions with this server.
(Requires prior use of the radius-server host command to
configure a RADIUS server IP address in the switch. See
“Configuring RADIUS Accounting” on page -114.)
Figure 52. Example of Authentication Information from the Show Authentication Command
Figure 53. Example of RADIUS Authentication Information from a Specific Server