Filter
Top Products
225
Updates and Corrections for the Management and Configuration Guide
Also on page 9-54, add the following item to the bulleted list:
■ When TimeP is enabled and configured for DHCP operation, the switch learns of TimeP
servers from DHCP and Bootp packets received on the primary VLAN.
Misleading Statement About VLANs
On page 9-56 in the Management and Configuration Guide, the last sentence in item 1 implies that by
default the switch is configured for eight VLANs. The sentence should read as follows:
"By default, VLAN support is enabled to support up to eight VLANs, and the switch is configured for
one VLAN (the default VLAN). By changing the Maximum VLANs to support parameter, you can
configure up to 29 VLANS."