Filter
Top Products
210 Appendix B - Control panel menus
EN
Paper Handling Menu
When paper handling settings are correctly configured through the
control panel, you can print by choosing the type and size of paper
from the printer driver or software application. For more information,
see “Printing by type and size of paper (locking trays)” on page 70.
Some items in this menu (such as duplex and manual feed) can be
accessed from a software application, or from the printer driver (if the
appropriate driver is installed). Printer driver and software application
settings override control panel settings. For more information, see
“Using features in the printer driver” on page 65.
Paper Handling Menu
Item Values Explanation
ENVELOPE FEEDER
SIZE=COM10
For supported
paper sizes, see
“Supported sizes
and weights of
paper” on
page 189.
This item appears only when the optional
envelope feeder is installed. Set the value to
correspond with the envelope size currently
loaded in the envelope feeder.
ENVELOPE FEEDER
TYPE=PLAIN
For supported
paper types, see
“Supported
types of paper”
on page 192.
This item appears only when the optional
envelope feeder is installed. Set the value to
correspond with the envelope type currently
loaded in the envelope feeder.
TRAY 1 MODE=
FIRST
FIRST
CASSETTE
Determine how the printer will use tray 1.
FIRST
: If paper is loaded in tray 1, the printer
will pull paper from that tray first.
CASSETTE
: A paper size must be assigned to
tray 1 using the
TRAY 1 SIZE
option (the next
item in this menu when
TRAY 1
MODE=CASSETTE
). This allows tray 1 to be used
as a reserved tray.
For more information, see “Customizing tray 1
operation” on page 69.
TRAY 1 SIZE=
LETTER
For supported
paper sizes, see
“Supported sizes
and weights of
paper” on
page 189.
This item appears only when
TRAY 1 MODE=
CASSETTE
. Set the value to correspond with
the paper size currently loaded in tray 1.