Filter
Top Products
Ignore
Applies no filtering action if the contents of the packet field falls within the range
established by the matching set of (low) and (high) parameters..
Match
Applies the filtering action (drop/accept/log) if the contents of the packet field falls
within the range established by the matching set of (low) and (high) parameters.
Host lists
Displays parameters for setting the lower and upper boundaries of the range for a
Host list. For more information, refer to “Host (low)” and “Host (high).”
Host (high)
Sets the upper boundary of the range for filtering XNS source or destination hosts
when creating a Host list.
Options
Leave this field blank and enter the XNS host number in the Host (low) field if you
are filtering a single XNS source or destination host.
Enter the highest XNS host number in the range if you are filtering a range of XNS
source or destination hosts.
For additional information, refer to “Host (low)” later in this chapter. To learn how
to assign a Host list to a filter, refer to “Dest Host (low)” and “Source Host (low)”
later in this chapter.
Host (low)
Sets the lower boundary of the range for filtering XNS source or destination hosts
when creating a Host list.
Options
Enter the XNS host number in this field and leave the Host (high) field blank if you
are filtering a single XNS source or destination host.
Enter the lowest XNS host number in this field and enter the highest host number
in the Host (high) field if you are filtering a range of XNS source or destination
hosts.
For additional information, refer to “Host (high)” earlier in this chapter. To learn
how to assign a Host list to a filter, refer to “Dest Host (low)” and “Source Host
(low)” later in this chapter.
Host Number
Assigns a unique XNS physical host address to the router. Your HP router was
shipped with a unique, universally-administered 48-bit station address for each port
stored in read-only memory (ROM).
Default: Blank (assigns the factory-default station address).
Network Number (high)
Sets the upper boundary of the range for filtering XNS source or destination
networks when creating a Network list.
Xerox Network Systems (XNS) Router Parameters
Parameters and Options
10-8