Filter
Top Products
rr_rx contains the number of RR (Receiver Ready) frames received
by X.25 circuit cct. An
RR frame either indicates the readiness to receive
I frames, or acknowledges the receipt of I frames.
rr_tx contains the number of
RR (Receiver Ready) frames transmit-
ted by X.25 circuit cct. An
RR frame either indicates the readiness to
receive I frames, or acknowledges the receipt of I frames.
sabm_rx contains the number of
SABM (Set Asynchronous Balanced
Mode) frames received by X.25 circuit cct.
SABM frames initiate the
establishment of the
DCE/DTE link.
sabm_tx contains the number of
SABM (Set Asynchronous Balanced
Mode) frames transmitted by X.25 circuit cct.
SABM frames initiate the
establishment of the
DCE/DTE link.
ua_rx contains the number of
UA (Unnumbered Acknowledgment)
frames received by X.25 circuit cct.
UA frames acknowledge receipt of
SABM or DISC frames, and complete the establishment or termination of
the
DCE/DTE link.
ua_tx contains the number of
UA (Unnumbered Acknowledgment)
frames transmitted by X.25 circuit cct.
UA frames acknowledge receipt
of
SABM or DISC frames, and complete the establishment or termination
of the
DCE/DTE link.
unknown_rx contains the number of
FRMR (Frame Reject) frames
received by X.25 circuit cct that contained a W bit set to 1. This bit
setting indicates that the remote end has rejected a frame issued by cct
because the frame contained an invalid, or unimplemented, command or
response.
unknown_tx contains the number of
FRMR (Frame Reject) frames
transmitted by X.25 circuit cct that contained a W bit set to 1. This bit
setting indicates that cct has rejected a previously received frame
because the frame contained an invalid, or unimplemented, command or
response.
Management Information Base Variables
x25: X.25 Information Base
18-108