Filter
Top Products
Aggregate Rejection
aged_pkt_loss contains the number of packets dropped by the
DECnet router because the packet had transited too many routers prior
to reaching its destination. The maximum number of routers that a
packet can transit is determined by the Area Max. Hops and Max. Hops
parameters. Area Max. Hops specifies the number of routers that a
packet can transit before reaching its destination area; Max. Hops
specifies the number of routers within an area that a packet can transit
before reaching its destination node.
node_unreach contains the number of packets dropped by the
DECnet router because the destination node (while within range) was
unreachable.
node_out_of_range contains the number of packets dropped by the
DECnet router because the destination node resided in an area having a
number greater than that designated by the Max. Area parameter, or
because the destination node number exceeded that designated by the
Max. Nodes parameter.
oversized_pkt_loss contains the number of packets dropped by the
DECnet router because the packet size exceeded the capacity of the
transmission media.
pkt_format_error contains the number of packets dropped by the
DECnet router because some portion of the packet header could not be
parsed.
route_update_loss contains the number of topology packets
dropped by the
DECnet router because the packet contained information
beyond the router’s capacity.
Managment
Information Base
18
Management Information Base Variables
drs: DECnet Circuit Group Information Base
18-59