Filter
Top Products
specified call restrictions placed on inbound calls. This is an unlikely
event and may indicate an error by the connected adapter.
Note: In V.25 bis mode, the WAN Net Fail LED lights if the connected adapter
does not respond with CTS True within 20 seconds of the router raising
DTR. The Net Fail LED turns off if the adapter subsequently does
respond.
In manual adapter mode, the WAN Net Fail LED lights if a connection
does not come up within the connect wait time on the first attempt to
establish an outbound connection. The LED turns off if a connection is
established on a subsequent retry.
unknown char
X
in phone number
Meaning: The phone number configured (for terminal adapter) has unexpected
characters. These characters will not be used when making or receiving
the call.
unknown char
X
in recv phone number
Meaning: The received phone number has unexpected characters. The router will
ignore them.
Action: Check the terminal adapter configuration.
unknown char
X
in recv sub-address
Meaning: The received sub-address has unexpected characters. The router will
ignore them.
Action: Check the terminal adapter configuration.
unknown char
X
in sub-address
Meaning: The sub-address configured has unexpected characters. These
characters will not be used when making or receiving the call.
Event Log Messages
cct: Circuit Event Messages
17-56