Filter
Top Products
zmodem: Zmodem Event Messages
These event messages are NCL error codes that can occur when using
the Zmodem commands Zput and Zget.
Display-Only Zmodem Event Messages
These messages are not listed in the event log. They appear only on the
console display. For messages that are also logged, see page 17-150.
Command only allowed from the Console Port
Meaning: The Zmodem commands are allowed only from the console port. Telnet
sessions cannot use them.
The Configuration Editor is in use by another session
Meaning: Indicates that the a transfer of the configuration file is not allowed
because the Configuration Editor is currently accessing it.
Action: Check for Telnet sessions running the Configuration Editor.
The Configuration file is being TFTP’d by another session
Meaning: Indicates that a transfer of the configuration file is not allowed because
it is currently being transferred using TFTP.
Action: Check for Telnet sessions running TFTP.
Missing local file name
Meaning: The local file name (or command) was not included with the Zput
command.
Action: The local file name to transfer must be entered. (For example, the
configuration file.)
Event Log
Messages
17
Event Log Messages
zmodem: Zmodem Event Messages
17-149