Filter
Top Products
3-30
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 3-30 (seq: 106)
This is the black on page 3-30 (seq: 106)
5
For each cartridge in the set that needs to be replaced:
a Take the new cartridge out of its box.
b Remove the colored protective tape and tab from the cartridge’s nozzles.
For the HP DesignJet 750C Plus, match the color of the
cartridge’s label with the color of the dot above the stall.
c Insert the cartridge in the correct stall. Press down lightly and push the
cartridge away from you until it snaps into place.
Yellow
Cyan
Magenta
Black
If the front-panel display says Reseat cartridge(s), then remove the cartridge
indicated in the display and insert it again. Do so until the message disappears.
0019
1754
750C Plus
700
750C Plus
6 When you have finished installing the cartridge(s), the plotter runs the automatic
alignment procedure. When the front panel displays
STATUS / Ready, the
procedure is complete. You can throw away the small print produced during the
alignment procedure.
Working With Media and Cartridge(s)
Replacing Cartridge(s)
This is the magenta on page 3-30 (seq: 106)
This is the yellow on page 3-30 (seq: 106)