Filter
Top Products
700
750C Plus
1-26
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 1-26 (seq: 44)
This is the black on page 1-26 (seq: 44)
3 The Receiving light flashes while the plot is being processed, and then the plotter
starts printing. After it has finished:
On roll media, the plotter waits for the ink to dry, if necessary, and drops the
plot into the media bin.
On sheet media, wait until the ink is dry, if necessary (see the front-panel
display for an ink-drying message), and then gently pull the sheet out from the
plotter. On HP Coated Paper you don’t need to wait at all.
4 Examine the plot, with the following questions particularly in mind:
Are the lines clean and complete?
Are the area fills smooth?
Are the black and white areas correctly defined?
Is the color of good quality?
Unless you changed it, the print-quality setting on the front panel was
Best. If you
have any concerns about the print quality of the sample plot, use the
troubleshooting advice starting on page 9-16.
Setting Up the Plotter
Task 6: (Optional) Print a Demonstration Plot