Filter
Top Products
1-19
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 1-19 (seq: 37)
This is the black on page 1-19 (seq: 37)
3
Press the ↑ key next to the front-panel display to indicate you are loading a
sheet.
Sheet load
Roll load
↓
↑
––––––––>
––––––––>
0014
4
SELECT MEDIA
Opaque bond
Enter
↓
↑
Press the ↑ or ↓ key until the display shows the type of media you are loading
(if you are using regular plotter paper, scroll to
Opaque bond; if coated paper,
scroll to
Coated paper), and then press the Enter key.
0014
5 The plotter moves the sheet in and out to check its size and alignment, and then
advances it to the start of the page. When sheet loading is complete,
STATUS /
Ready
is displayed.
If you have persistent difficulty loading media, this may indicate poorly cut media
– see page 3-21 for advice.
SETUP
1
Setting Up the Plotter
Task 4: Load Media