Filter
Top Products
750C Plus
Affects next plot sent
5-10
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 5-10 (seq: 126)
This is the black on page 5-10 (seq: 126)
To Switch between Color and Monochrome
1
Use the front-panel key shown below to toggle between color and
monochrome.
Color
Mono
If you are using one of the software drivers supplied with the plotter, you
can also make this setting (or an equivalent) within the driver. In this case,
the driver setting will override the front-panel setting. The front-panel
setting will, however, remain available as the default value, and the
front-panel light displayed will not change.
If you use the supplied AutoCAD driver, you can force a color plot to
monochrome by additionally setting the current palette to something other
than Software (see page 5-6).
0027
2 Send the plot from your computer.
The setting also impacts the plotter’s internal sample plots.
Controlling a Plot’s Overall Appearance
Printing Color Drawings in Monochrome